The fitting is designed to operate a range of Compact Fluorescent lamps up to 42W, High Pressure Sodium lamps up to 200W, Metal Halide lamps up to 250W and LED up to 72W. The LED is an Osram high powered LED mounted onto an aluminium circuit board incorporating Zener diodes and thermal protection.
Recommended LED 4000 Kelvin Natural white with CRI >70.
Ambient temperature 36° C , designed for 55 000 hours.
For LED - Modular optical lenses are used. Material PMMA. Various lens options available for different applications, allowing for custom solutions.
99.7% purity deep drawn anodised aluminium reflector for Compact Fluorescent, High Pressure Sodium and Metal Halide lamps.
Post or wall mounted.
Recommended mounting height 3.5m to 9m
Top mounted, equipped with threaded aluminium M24 connecting nipple.
Side entry 34mm Ø spigot entry. For detailed mounting specifications refer to pole and accessories section.
CONTROL GEAR :
Electronic or magnetic control gear. The electronic power supply is suitable for operation with a 220 - 240 volts. 50 hertz single phase. For LED - Incorporates an electronic trip connector protector with surge protection 6 KV. Additional removable inline surge arrester 10 KV.
All external screws are stainless steel.
Cable glands are SABS approved to insulate IP67 ingress protection.
Gaskets are manufactured from post cured silicone rubber material.
Silicone gaskets perform in a wide temperature range -40° C to +200° C.
INGRESS PROTECTION :
Ambient Temperature : ta 36° C.
Weight : 10 Kg total including control gear.
Windage : Max. projected areas for mounting - 0.07531 square metres.
System wattage is indicated.
3000K and 5000K available on request. For 3000K reduce lumen output by 7%.
The nominal flux of the LED is based on the LED manufacturers data at 25° C.
The environmental conditions of the installation will impact the efficiency of the LED’s.
Due to the continual advancement in LED technology the type of LED is subject to change.