The Linux has been designed for indoor and outdoor installations, for industrial and security lighting applications. This bulkhead is suitable for ceiling and wall mounting.
This versatile fitting is designed to operate a range of High Pressure Sodium lamps up to 100W, Metal Halide lamps up to 100W and LED up to 48W.
Ideal solution for industrial applications.
Symmetrical or asymmetrical light distribution.
Wall or ceiling mounted.
LM 6 die cast aluminium.
15 Kg total weight including control gear.
MODEL NUMBER : C329 - LINUX
HOUSING : LM 6 die cast aluminium.
LIGHT SOURCE : The fitting is designed to operate a range of High Pressure Sodium lamps up to 100W, Metal Halide lamps up to 100W and LED up to 48W. LED used - Osram high powered LED mounted onto an aluminium circuit board incorporating Zener diodes and thermal protection. Zener diodes between each LED.
Recommended LED 4000 Kelvin Natural white with CRI >70.
Ambient temperature 36° C , designed for 55 000 hours.
DIFFUSER : Borosilicate clear tempered glass. Dome or flat glass available.
LENSES : For LED - Modular optical lenses are used. Material PMMA. Various lens options available for different applications, allowing for custom solutions.
REFLECTOR : High efficient reflector system. 99.9% purity deep drawn anodised aluminium reflector suitable for clear tubular lamps for High Pressure Sodium and Metal Halide lamps.
FINISH : Fitting is supplied as raw aluminium. Powder coating can be supplied on request.
MOUNTING : Wall or ceiling mounted. Anti-vibration mounting, eyebolt suspension mounting or spigot mounting available on request.
CONTROL GEAR : All control gear is suited to 230V +3%/-10% 50Hz single phase supply and power factor corrected to 0.9. All internal wires are Silicone coated. For LED it incorporates an electronic trip connector protector with surge protection.
The arrester will only blow when a lighting strike or a power surge is extreme (400-500VA) the device will manage over and under voltage ensuring no damage to PC boards
FASTENERS : All exterior fixings are manufactured from 316 stainless steel.
All internal fixing screws, lamp holder bracket and gear plate are corrosion resistant electro-plated. Cable glands are SABS approved to insulate IP67 ingress protection.
GASKET : Gaskets are manufactured from silicone closed cell gasket. Silicone gaskets perform in a wide temperature range -40° C to +200° C.
INGRESS PROTECTION : IP 66.
OPERATING TEMPERATURE (Ta) ≤ 36° C.
WEIGHT : 15 Kg total including control gear.
FEATURES : The body incorporates two aluminium LM6 mounting lugs and one M20 threaded gland entry.
It is fitted with four stainless steel Grade 304 latches with hinge facility.
The LM6 aluminium frame retains the diffuser with hinge and wire guard fixing mechanism.
The LED version is permanently sealed and supplied with a 0.5m long silicone cabtyre.
LED Osram Oslon Square Giant 4000 Kelvin
|12 LED's||24 LED's|
|350mA||12W||1727 lm||23W||3455 lm|
|500mA||17W||2475 lm||34W||4950 lm|
|700mA||24W||3414 lm||48W||6828 lm|
System wattage is indicated.
3000K and 5000K available on request. For 3000K reduce lumen output by 7%.
The nominal flux of the LED is based on the LED manufacturers data at 25° C.
The environmental conditions of the installation will impact the efficiency of the LED’s.
Due to the continual advancement in LED technology the type of LED is subject to change.
|HST (HPS)||50W or 70W||E27|
Emergency Gear 4500K
Remote control gear.
Invertor : 12 Volt 3 - 20 Watt
10 minute time delay.
Battery Pack : 10 x 2 AH Ni-CAD
Minimum 90 minutes of emergency
Modular optical lenses. Material PMMA. Various lens options available for different applications, allowing for custom solutions.
- Indoor or outdoor application.
- Symmetrical or asymmetrical distribution.
- Industrial lighting
- Security lighting
- Tunnel lighting
- Facade lighting
- Railyard lighting
- Hazardous area lighting
|Matt Silver (MS)|
|Charcoal Grey (CG)|